Cable trough unit is used for cable laying on single-track railway and two-ways track railway bridges. Work-pieces conform to standards GTSS 410111 (SHP-59-01).
On railway bridges cable is laid out with the use of inlying sheet-iron chute cable duct. Cable ducts are mounted on outboard supports; cable trough length is not to exceed 2,0 m.
| typical size | sectional view |
| 140 mm ×200 mm | 140×300 mm |
| 140 mm ×200 mm | 140×400 mm |
| 140 mm ×200 mm | 200×300 mm |
| 140 mm ×200 mm | 200×400 mm |
There are following types of cable trough:
Use of cable trough provides:
Work-pieces conform to standards GTSS 410111 (SHP-59-01); needed for bridge span cross-walk providing (top road bridge and bottom-road bridge).The equipment is used on single-track railway and two-ways track railway bridges.
Usage pattern:
Unit cover plate provide access to cables; there are mountings with locking mechanism (for span and extended sections)
drain condensation holes
Support types:
Type 1 screw retainment to underside of bridge
Type 2 holdup screen and constructions above screw retainment
Type 3 cable anchorage to abutment pier
Supports may be fastened by welding operation, maximal step 1,5 m. Mounting hardware height control and above bridge overhanging length control of the unit is possible.
splitters may be used for signal- and supply cable trapping
cable components unfit for pass-through it
cable trough base stand fibreglass elastic foundation protects the cable from accident-caused damage
corrosion-resistant coating
Important: the quantity of supports is counted off as 1 pcs per 1,5 m of the bridge length.
We deliver cable trough unit around the country and the CIS region!
