FZhA2.01g railroad lamp with sealed battery.
FZhA2 railroad lamp is designed for use as a portable lamp for local lighting and light signal. A sealed lithium polymer (Li-PO) battery with a capacity of 3.3 Ah is used as a power source.
Lamps are manufactured in the following modifications:
- with a sealed battery, with a cable length from the battery to the searchlight 350 mm, white, red and green emission spectrum
-
with a sealed battery, with a cable length from the battery to the searchlight 800 mm, white, red and green emission spectrum
Switching from one light to another is done using a switch located on the searchlight. There are two additional modes: close and far light. Supplied with or without charger. The battery can be charged using an individual charger IZU or IZU-2M, powered by U=220V. On the cover of the lamp there is a socket for inserting the plug of the charger.
You can also use other chargers that provide charging modes with a stabilized voltage U=4.5+0.1V, rated for a current of at least I=2.5A, equipped with a contact group for charging the lamp through the headlight.
To put the lamp on a charge, it is required to:
- install the lamp on the shelf of the charging table
-
install the headlight of the lamp on the charging key, aligning the protrusion on the key and the groove of the headlight bushing
-
turn the headlight clockwise 180% until it stops so that the outer negative contact coincides with the spring contact of the charging table
-
make sure the battery is on charge
After removing the lamp from the charging station, check with a voltmeter that there is no voltage between the headlamp bracket and the negative terminal.
Alfa-ZhAT guarantees the lowest price for railroad man’s lamps.
Delivery to any region of Russia and the CIS!
